List of Publications

Diagnostics & Control
Research Centre

Smart Materials

Paxton, R.A., et al. Modeling of optical gel electroactive response. Electroactive Polymer Actuators and Devices (EAPAD) Smart Structures and Materials SPIE. 2004
Paxton, R.A., et al. Diffusion Module Incorporated into an Electroactive Lens Model. Proceedings of the International Conference on the Science and Technology of Synthetic Metals, ICSM 04,. 2004. Wollongon, Australia.
Al-Jumaily, A.M. and H. Kadhum. Intelligent Conductive Polymer for Combined Sensing-Heating Application. Proceedings of the International Conference on the Science and Technology of Synthetic Metals, ICSM 04. 2004. Wollongon, Australia.
Abbass, I., A.M. Al-Jumaily, and M. Ramos, An Improved Po;ymer for Optical applications. Electroactive Polymer Actuators and Devices (EAPAD) Smart Structures and Materials SPIE V2, 2004: p. 5385-58.
Paxton, R.A., et al. Smart Polymers for Adaptive Control Schemes. Proceedings of Neurocomputing and Evolving Intelligence 2003 (NCEI'2003). 2003. Auckland University of Technology.Auckland, New Zealand.
Paxton, R.A., A.M. Al-Jumaily, and A.J. Easteal. Gel-type changeable focal length lens. Electroactive Polymer Actuators and Devices (EAPAD) SS03 Smart Structures and Materials. 2003
Paxton, R.A., A.M. Al-Jumaily, and A.J. Easteal, An Experimental Investigation on the Development of Hydrogels for Optical Applications. Journal of Polymer Testing, 2003(22): p. 371-374.
Al-Jumaily, A.M. and S. Jassim. Prospective Optical Electroactive Polymers. Electroactive Polymer Actuators and Devices (EAPAD) SS03 Smart Structures and Materials. 2003
Sakhawat, M., et al., Is It Feasible To Have Changeable Focal Length Lenses? Recent Res.Devel.Sound & Vibration TRN/SV/4, 2002. 1: p. 497-508.
Razak, K.A., M. Ramos, and A.M. Al-Jumaily. Review on the Development and Application of Piezoelectric Ceramics. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Paxton, R.A., A.M. Al-Jumaily, and A.J. Easteal. The Use of Electroactive Polymer Hydrogels as a Smart Lens Material-Initial Experimental Results. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Lowy, J.D. and A.M. Al-Jumaily. Application of Polymers as Optical Filters on Moulded Components: Review. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Jassim, S., et al., Piezoelectric polymer with some optical characteristics. Journal of Polymer Testing, 2002. 21.

Respiratory System and Devices

Hermawan, V. and A.M. Al-Jumaily. Tube-like Tissue Elasticity Using Two Frequency Levels. Proceedings of the 2004 New Zealand National Conference on Non Destructive Testing. 2004. Palmerston North, New Zealand.
Al-Jumaily, A.M., et al. Asthma: Acoustic Identification and Vibration Relief. Australian Asthma Conference. 2004. Melbourne, Australia.
Du, Y. and A.M. Al-Jumaily, Identification and Assessment of Constrictions in a Branched Tube System. The Journal of the Acoustical Society of America, 2003. 114(No. 4, Pt.2 of 2): p. 2435.
Chan, H., et al. Pressure Control for Constant Pressure Masks. Proceedings of the Tenth Electronics New Zealand Conference. 2003. University of Waikato, Hamilton, New Zealand.
Au, P.M. and A.M. Al-Jumaily. Investigation of an Alternative Relief of Asthma. Proceedings of World Congress on Medical Physics and Biomedical Engineering. 2003. Sydney Convention and Exhibition Centre, Sydney, Australia.
Au, P.M. and A.M. Al-Jumaily. Free Vibrations of a Branched Structure as Applied to the Respiratory System (IMECE2003-41770). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2003. Washington, DC.
Al-Jumaily, A.M. and D. White, Optimization and Development of Breathing System. Technical Report No. DCRC03-3 prepared for Fisher and Paykel Healthcare Ltd, , Auckland, New Zealand., 2003.
Al-Jumaily, A.M. and R.A. Paxton, Assessment of motion and sound treatments of infants. Technical Report No. DCRC03-2 prepared for Sweet Dreams Ltd. Auckland, New Zealand., 2003.
Al-Jumaily, A.M., et al. Modeling and Simulation of A Breathing System (IMECE2003-41853). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2003. Washington, DC.
Al-Jumaily, A.M., P.I. Manilal, and N. Prime. Vibrations Generated by Pressure Oscillations For Improving Neonates Breathing (IMECE2003-41739). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2003. Washington, DC.
Al-Jumaily, A.M. and N. Mago. Refined Finite Element Analysis for the Low Frequency Characteristics of the Trachea- Bronchia (IMECE2003-41740). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2003. Washington, DC.
Al-Jumaily, M. A.M. Fatemi, and J.M. Greenleaf, Vibration Characteristics of Implants. The Journal of the Acoustical Society of America, 2003. 114(No. 4, Pt.2 of 2): p. 2378.
Al-Jumaily, A.M. and Y. Al-Fakhri, Occlusion Identification in Respiratory System Using Asymmetric Model. Journal of Communications in Nonlinear Science and Numerical Simulation, 2003. 8.
White, D.E., et al. Dynamic Characteristics of a Compliant Tube Conveying Air. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Manilal, P.I., A.M. Al-Jumaily, and N. Prime. Pressure Oscillations to Improve Neonatal Breathing: A Review. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Foreman, E.P.M. and A.M. Al-Jumaily. Development And Design Of A Controller For A Two-Dimensional Actively Controlled Toolpost (IMECE2002-DSC-33562). Proceedings of ASME, International Mechanical Engineering Congress and Exposition, IMECE2002. 2002. New Orleans, Louisian.
Chan, H.K. and A.M. Al-Jumaily. Pressure Control For Sleep Apnea Treatments: Review. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Au, P. and A. Al-Jumaily, Asthma Relief and Airway Mechanics. TRN/SV/3 'Recent Res.Devel.Sound & Vibration, 2002. 1: p. 479-495.
Au, P.M. and A.M. Al-Jumaily. A Dynamic Investigation of Airways. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Aladesaye, M., A.M. Al-Jumaily, and B. Coubray. Vibration Serviceability of Floor Joists Due to Walking Excitation. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Al-Jumaily, A. and N. Mago. Low Frequency Analysis Of The Tracheo-Bronchia (IMECE33412). Advances in Bioengineering, Proceedings of ASME, International Mechanical Engineering Congress and Exposition, IMECE2002. 2002. New Orleans, Louisiana.
Al-Jumaily, A. and Y. Du, Obstruction Identification in a Compliant Tube with Application to Airway Passages. Journal of Vibration and Control, 2002. 8(5): p. 643-657.
Al-Jumaily, A. and Y. Al-Fakhri. Significance Of Elastance Variation On RESPIRATORY SYSTEM Dynamics (IMECE2002-BED- 33519). Advances in Bioengineering, Proceedings of ASME, International Mechanical Engineering Congress and Exposition, IMECE2002. 2002. New Orleans, Louisiana, USA.
Al-Jumaily, A.M. and Y. Al-Fakhri. Asymmetrically Respiratory System Simulation to Identify Airway Occlusion (IMECE2001/DE TOC-23233). Proceedings of ASME, International Mechanical Engineering Congress and Exposition,. 2002. New York, New York.
Al-Sakini, A., A.M. Al-Jumaily, and H.H. G. Distribution Transformer Integrated Manufacturing. Proceedings of the 8th Annual New Zealand Engineering and Technology Postgraduate Conference. 2001. Waikato University, Hamilton, New Zealand.
Al-Jumaily, A. and D. Y. Simulation of the Central Airways for Identifying Airway Partial Obstruction (IMECE2001/BED23105). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2001. New York, New York.
Al-Jumaily, A. and D. Y. Obstruction Detection in the Upper Airways Using Input Impedance in Frequency Domain (IMECE2001/BED-23106). Proceedings of ASME, International Mechanical Engineering Congress and Exposition. 2001. New York, New York.
Al-Jumaily, A.M., Vibration Assessment of Sleeper Bats. Technical Report No. DCRC01-3 prepared for Jacob International Ltd., New Zealand, 2001.
Al-Jumaily, A.M. and K. H., Self-Regulating Tube. Technical Report No. DCRC01-2, prepared for Fisher & Paykel Healthcare Ltd, Auckland, NZ., 2001.
Al-Jumaily, A.M. and Y. Al-Fakhri, Influence of airway wall properties on respiratory system response characteristics. The Journal of the Acoustical Society of America, 2001. 106(4 Part 2): p. 2172.

Other

Al-Sakini, A., et al. Computer Integrated Manufacturing of Distribution Transformers. Proceedings Of the 19th International Conference on CAD/CAM Robotics and Factories of the Future. 2003. Kuala Lumpur, Malaysia.
Al-Jumaily, A.M., D. White, and B. Fricker, An Investigation into the Cause of Abnormal Condensations in Home Ventilating System. Technical Report No. DCRC03-5 prepared for Cristal Air Ltd., Auckland, New Zealand., 2003.
Yan, W.Y. and A.M. Al-Jumaily. Workpiece Deflection Compensation Using Two Dimensional Toolpost. ASME Symposium on Dynamics, Acoustics and Simulations, Proceedings of ASME, International Mechanical Engineering Congress and Exposition, IMECE2002. 2002. New Orleans, Louisiana.
Syed, T.H., et al. The Battery Management System: Requirements and Design. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Protheroe, M.D. and A.M. Al-Jumaily. A Virtual Model of a Plate Heat exchanger for Educational Purposes-Initial Findings. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Ottaway, G.M. and A.M. Al-Jumaily. An Optimum Fuel Flow Measurement System for Marine Applications Proposal. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Cao, M., A.M. Al-Jumaily, and W.C. Carson. Innovative Speedfloor System. Proceedings of the 9th Annual New Zealand Engineering and Technology Postgraduate Conference. 2002. Auckland University of Technology, Auckland, New Zealand.
Aladesaye, M., A.M. Al-Jumaily, and B. Coubray. Steel Joists for Cost Effective Flooring System. tructural Systems and Design, Proceedings of the Advances in Building Technology. 2002. The Hong Kong Polytechnic University, Hong Kong.
Al-Jumaily, A. and H. Khadum. Self-Contained Intelligent Sensor-Actuator For Temperature Control (DSC-33218). Dynamic System and Control, Proceedings of ASME, International Mechanical Engineering Congress and Exposition IMECE2002. 2002. New Orleans, Louisiana.
Al-Jumaily, A.M., H. Oberst, and W.Y. Yan. Two-dimensional Vibration Abatement in a Turning Process. Proceedings of the Sixth International Conference on Rotor Dynamics. 2002. The University of New South Wales, Sydney, Australia.
Yan, W. and A.M. Al-Jumaily. Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in A Turning Process. Proceedings of ASME, International Mechanical Engineering Congress and Exposition, Proceedings of ASME, International Mechanical Engineering Congress and Exposition, IMECE2001/DE TOC-23201. 2001. New York, New York.
Yan, W. and A.M. Al-Jumaily, Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in A Turning Process. J. Multi-body Dynamics, Part K, 2001. 216: p. 335-342.
Al-Jumaily, A.M. and A. Al-Sakini, Computer based System Integration and Optimisation of transformer manufacturing system. Technical Report No. DCRC01-1 prepared for ETEL Ltd, Auckland, NZ, 2001.